top of page

ADDITIONAL LIGHTSABER SPECS

Important!

Not all hilts are Duel-worthy!

Some lightsabers are recommended to be used for tricks, cosplay or display only; including the kyber crystal saber, thin-necks, and any others we may deem not duel-worthy as noted in the product description.

 

AVAILABLE BLADE OPTIONS & PRICING

  • STANDARD-Dueling Blade: 2mm thick, polycarbonate RGBX blade (up to 36") - Included in purchase

    • Possible Upgrade Options (based on availability): 

3mm RGBX Heavy-Dueling Blade +$25

32" Pixel Blade (for Xenopixel only) +$80

36" Pixel Blade (for Xenopixel only) +$80

​

BLADE INFO & SPECS

  • Blade Material

    • Polycarbonate​

  • Measurements​

    • 1" round blade​

    • Blade wall thickness (RGBW & PIXEL BLADE)

      • 2mm Standard-Dueling Blade (included in purchase)​

      • 3mm Heavy-Dueling Blade +$25 (in addition to 2mm included in purchase)

    • length (RGBX* & Pixel Blade)​

      • 36" ​
        *NOTE: RGBX Blades can be trimmed by request

        • Our Blade Length Recommendations:

          • 12"-36" 

          • Wielders 6'0 or taller, the Standard 36" Blade is recommended

          • Wielders 5' 9" to 5'11", a 32" blade is recommended

          • Wielders 5'0 to 5'8", a 28"-30" Blade is recommended 

          • Younger wielders (minors): 24" 

          • STAFFS: 24" recommended (otherwise, the staffs are about 8'0 in length from blade tip to blade tip)

  • All Blades support dueling and look great from dusk until dawn!​

  • Removable blade

    •  use the Allen wrench to tighten/loosen the screws in the emitter (all tools included)

​

Hilt Specs

  • HILT MATERIAL

    • 6063 Aluminum Alloy

  • HILT EFFECTS

    • Flash on Clash

    • Blaster Blocking Sounds

    • Saber Lock lighting effect

    • 9 sound fonts with Blade Lighting Effect for each

    • Convenient infinite color changing blade

    • Change the Color of the Blade (In-Hilt/In-Blade LED) to Red, Green, Blue, White, and ANY color in between, with the press of a button ​

    • PIXEL BLADES ONLY: Power Up/Down Blade Light Effect/Slide Illumination

  • IN-HILT LED:

  • WATTAGE: 

    • RGBX: 12 Watt

  • IN-BLADE LED (Pixel Blade Only):

  • WATTAGE: 

    • Xeno: 50 Watt

 

CHARGE & PLAY TIME

  • RGBX: 4 hours to fully charge / 2 hours of steady use

  • Pixel Blade Soundboards: 8-10 Hours to fully charge / 1.5-2 hours of steady use

 

Charger Information

  • Charger:  5v 1 amp Plug and Play USB Charger or External charger depending on saber

    IMPORTANT! Charging Instructions: Due to the low voltage, do NOT plug your charger directly in to the wall or use a "Fast Charging" Cable. Doing so has a potential of damaging the soundboard or battery.​ See Charging Instructions in the FAQ for more information

  • Battery: 

    • RGBX: Lithium-Ion 18650 3.7V 3000mah Rechargeable

    • Lithium-Ion 18650 10A 3600mah Button-top Rechargeable

  • Speaker: 

    • ​2-3 Watt 4 OHM

  • Recommended Age Range: 
    Persons under the age of 13, should have adult supervision when using the lightsabers. our 3-year-old son has a blast playing with our personal sabers. we recommend Requesting a Blade Trim for smaller saber wielders.

bottom of page